Page 1 of 1
Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Thu Apr 21, 2016 10:33 am
by Buckeye
This is going to sound absolutely ridiculous because I own both bows... but the problem is that both of them are mounted about 7-8 feet up on my walls and are really a pain to get to.
Would someone be willing to take a full SIDE view picture of just one of the support arms? I need a profile shot for a project I'm working on. You'd be my hero of the week.
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Thu Apr 21, 2016 10:59 am
by Valkrist
Here you go.
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Thu Apr 21, 2016 11:22 am
by Buckeye
Thank you, Valkrist. MUCH appreciated!
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Thu Apr 21, 2016 7:29 pm
by Valkrist
You're very welcome.
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Fri Apr 22, 2016 11:09 am
by Buckeye
Can I make one more request, this time for some measurements? I need the length and width of the flat portion on the plaque, and the overall height of the support piece (from the top of the protrusion above the arrow holder to the bottom edge where it joins the plaque). Many thanks.
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Fri Apr 22, 2016 3:15 pm
by Valkrist
Your wish is my command!
H: 4.5"
W: 7 3/4"
Support brace (from tip of U-shaped arrow holder to base: 3 3/4"
Re: Image Request -- Hobbit Tauriel or Legolas Bow Display Plaque
Posted: Fri Apr 22, 2016 3:22 pm
by Buckeye
You're the best. Thanks again, Val!