That's going to excite a lot of people!
Kit, will it still have those stars on the blade? I don't think those were on the original prop and I'm not sure why UC added them, or am I wrong? I could understand a star on Anarion's blade to represent Anor, the sun, but if anything should be engraved on Isildur's sword, it would be Ithil, the moon.
If this is a go, I think I will sell my original one while I still can make a profit on it. After years of the weight of the blade pulling on the cross guard as the sword hangs on its plaque, it has loosened up a bit and developed a slight wiggle that annoys the crap out of me any time I take the sword down. I don't suppose there's any quick and dirty fix for something like that? No way I'm even going to try and take it apart.
Re: United Cutlery's - The Hobbit - Movie Props!
4452Mine is riddled with QC issues, tilted hilt, bent pommel, tree in pommel misaligned, grind marks on the blade. With it being so limited I was still glad to have one.Nasnandos wrote: Tue May 18, 2021 3:05 am It looks like UC is considering reissuing the Isildur sword. That's one of the few LOTR swords that only had one run. It was the first sword made in their China sword factory also, so it never really matched the rest of the line. The blade was polished too much and they botched up the grip. If it happens, I'm going to see if I can get those things improved.
Would love to see an improved version. I had also noticed that the fuller should go up further into the etched design. I also did not see the 3 stars on the Weta prop either.
It really seems that they are trying to systematically re-release everything from the LOTR line, which is great for new collectors. I just want new stuff as well.
You do not have the required permissions to view the files attached to this post.
Re: United Cutlery's - The Hobbit - Movie Props!
4453I'm feeling a bit flustered and not sure where else to put this but it looks like the UK laws are changing again and it could mean that along with the ban on curved swords, even owning any curved swords bought before the ban was introduced is going to be an offence. The usual defences still apply though.
Currently, if you own a curved sword made from stainless steel it's not a crime, but you can't buy new ones unless they're handforged, etc - you've all heard me whine about it multiple times.
But this new law change, if it goes ahead later this year, would mean that I could potentially end up with a 4 year prison sentence for owning the swords if I was ever caught with them. The UK government had run a short armistice programme where you could claim compensation but I only became aware of it today but that armistice ended on the 9th March. So I would potentially have to surrender almost £1000 worth of swords and receive no compensation.
Currently, if you own a curved sword made from stainless steel it's not a crime, but you can't buy new ones unless they're handforged, etc - you've all heard me whine about it multiple times.
But this new law change, if it goes ahead later this year, would mean that I could potentially end up with a 4 year prison sentence for owning the swords if I was ever caught with them. The UK government had run a short armistice programme where you could claim compensation but I only became aware of it today but that armistice ended on the 9th March. So I would potentially have to surrender almost £1000 worth of swords and receive no compensation.
"All those moments will be lost, in time... like tears, in the rain..."
Re: United Cutlery's - The Hobbit - Movie Props!
4454Lindir, that totally sucks. I'm normally one of those irritating law-abiding and unquestioning individuals, but this sounds like excessive and unreasonable government overreach to me.
I'd say once the pandemic has eased up, it might be time to immigrate. I hear tell Canada is a nice place.
I'd say once the pandemic has eased up, it might be time to immigrate. I hear tell Canada is a nice place.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4455Great news on the sword of Isildur reissue but I really hope it comes with addressing the previous qc issues otherwise it may have to be a pass for me unfortunately. And of course if it can be made more accurate, even better.
This sounds like some of the most contrived nonsense I've ever heard. Are swords an actual problem in the UK??? Sorry you have to deal with this garbage, Lindir. I know it's easy for me to say but don't surrender anything. I live in California and have various firearm accessories that are considered "illegal" by our governmental nannies over here but I won't give them up to anybody. You just have to be smart and careful about it.Lindir wrote: I'm feeling a bit flustered and not sure where else to put this but it looks like the UK laws are changing again and it could mean that along with the ban on curved swords, even owning any curved swords bought before the ban was introduced is going to be an offence. The usual defences still apply though.
Currently, if you own a curved sword made from stainless steel it's not a crime, but you can't buy new ones unless they're handforged, etc - you've all heard me whine about it multiple times.
But this new law change, if it goes ahead later this year, would mean that I could potentially end up with a 4 year prison sentence for owning the swords if I was ever caught with them. The UK government had run a short armistice programme where you could claim compensation but I only became aware of it today but that armistice ended on the 9th March. So I would potentially have to surrender almost £1000 worth of swords and receive no compensation.
Last edited by Ronin on Tue May 18, 2021 6:57 pm, edited 1 time in total.
Re: United Cutlery's - The Hobbit - Movie Props!
4456Happy to hear about the idea of continuing the Isildur sword run. I know there are a lot of people out there who will be thrilled to get one at a reasonable price. Hopefully a second shot at it will help address the QC issues as others have stated. Shame to hear about braided leather being an impossibility though-that material on the grip annoyed me so much I think it was one of the primary reasons I sold mine a few years backNasnandos wrote: Tue May 18, 2021 3:40 am It won't be braided leather, that's for sure. Not for a production sword. It will likely be the same grip tooling, but I just want to improve the way it looks, and possibly change to a harder material. The grip on the one I got from production looked like a cheap Hong Kong toy from the 1970s.
The color was not right and the dark paint wash they applied in production was terrible. I think they can do a far better job now.
Still holding onto the hope that if some of these more minor characters and obscure weapons sell that we will one day see Denethor’s sword made. Criminal that it didn’t get more screen time in the movie.
Re: United Cutlery's - The Hobbit - Movie Props!
4457Ronin, no they aren't.
There's the odd crime committed with them here and there but they're very rare. I remember when I was younger, and this was just prior to me joining up with this forum and starting my sword collection, a woman not far away from where I lived at that time was stabbed with a katana and then run over in a car. It's a horrific incident.
Our government always seems very reactionary in its response to weapons, banning things like butterfly knives and throwing stars simply because of how they were talked about in the press. It's pretty hard to kill someone with a throwing star.
Butterfly knives were banned not because of the crimes they were used in, but because people were cutting themselves Doing tricks with them.
We're not allowed any form of truncheon or baton in the UK either. They're pretty stupid laws most of them and there's no distinction between political parties on the issue - they all want weapons banned.
The ban on curved stainless wall hangers flooded the market with straightened Katanas which people continued to buy. It didn't solve anything and it ended up making ugly ass swords.
There's the odd crime committed with them here and there but they're very rare. I remember when I was younger, and this was just prior to me joining up with this forum and starting my sword collection, a woman not far away from where I lived at that time was stabbed with a katana and then run over in a car. It's a horrific incident.
Our government always seems very reactionary in its response to weapons, banning things like butterfly knives and throwing stars simply because of how they were talked about in the press. It's pretty hard to kill someone with a throwing star.
Butterfly knives were banned not because of the crimes they were used in, but because people were cutting themselves Doing tricks with them.
We're not allowed any form of truncheon or baton in the UK either. They're pretty stupid laws most of them and there's no distinction between political parties on the issue - they all want weapons banned.
The ban on curved stainless wall hangers flooded the market with straightened Katanas which people continued to buy. It didn't solve anything and it ended up making ugly ass swords.
"All those moments will be lost, in time... like tears, in the rain..."
Re: United Cutlery's - The Hobbit - Movie Props!
4458The Rohan spear was posted on the FB group today.
I'm curious if this was just a concept render or an actual prototype?
I'm curious if this was just a concept render or an actual prototype?
Re: United Cutlery's - The Hobbit - Movie Props!
4459Are you referring to the UC facebook page?
Because I went there and I didn't see anything about this.
Do you have a link?
Because I went there and I didn't see anything about this.
Do you have a link?
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4460I'm not on FB, but I believe there is a LOTR collectors group page on there which is where Drew from UC regularly posts teaser photos and announcements. This is probably taken from there.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4461Yep, just like Val said, from the LOTR collectors group. I'm not on FB and saw this posted on the FOU forum.Deimos wrote: Fri Jun 11, 2021 4:23 pm Are you referring to the UC facebook page?
Because I went there and I didn't see anything about this.
Do you have a link?
Re: United Cutlery's - The Hobbit - Movie Props!
4462It's the Lord of the Rings Collectors group: https://www.facebook.com/groups/314103872034427Deimos wrote: Fri Jun 11, 2021 4:23 pm Are you referring to the UC facebook page?
Because I went there and I didn't see anything about this.
Do you have a link?
"If more of us valued food and cheer and song above hoarded gold, it would be a merrier world."
~~ Thorin Oakenshield
Re: United Cutlery's - The Hobbit - Movie Props!
4463That's a photo the factory shot of their first prototype. I don't have it yet, but the manufacturing cost ended up being a lot higher than expected. I'm not 100% sure United it is still going forward.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4464That would be tragic. I really hope UC follows through on this piece.Nasnandos wrote: Sat Jun 12, 2021 3:25 am That's a photo the factory shot of their first prototype. I don't have it yet, but the manufacturing cost ended up being a lot higher than expected. I'm not 100% sure United it is still going forward.
"If more of us valued food and cheer and song above hoarded gold, it would be a merrier world."
~~ Thorin Oakenshield
Re: United Cutlery's - The Hobbit - Movie Props!
4465Well, that's a shame. I would have figured it would cost less than say Eomer's helm. But they may be trying for a lower price point than that, somewhere closer to the swords MSRP.Nasnandos wrote: Sat Jun 12, 2021 3:25 am That's a photo the factory shot of their first prototype. I don't have it yet, but the manufacturing cost ended up being a lot higher than expected. I'm not 100% sure United it is still going forward.
Re: United Cutlery's - The Hobbit - Movie Props!
4466Seems a bit silly to post a photo like that as if it's a done deal when the production of the item is still in question. Why whip people up needlessly?
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4467I just got that news, so he probably did not know that when it was posted. It's unusual for raw materials to skyrocket in cost in such a short period of time, but costs have been wacky since January. Well, through 2020 as well, but it's even nuttier this year.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4468Yeah, the world has gone topsy-turvy. I remember not that long ago the cost of metal was affecting things; then it became the rising costs of fuel which affected shipping; now (or at least for Canada) it's the cost of lumber that has gone into the realm of pure insanity. Increases have been in the 300%+ range. It's affected everything, from home construction, to putting up a simple fence board or two.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4469Lumber is nutty high here in the US too. The materials cost to build a new home in my area is about 30% up over last year. I think it's mostly due to the increased fuel costs to move things around.
Sales don't seem to have slowed in my industry, but I imagine it is going to be extremely difficult for my clients to plan product development over the next year when a few months after they start development on something new the raw materials costs go up so much there is no way to keep the selling price where they thought it would work. Especially when that is happening every few months. I have one client who has basically decided to hold off developing any new products this year.
Sales don't seem to have slowed in my industry, but I imagine it is going to be extremely difficult for my clients to plan product development over the next year when a few months after they start development on something new the raw materials costs go up so much there is no way to keep the selling price where they thought it would work. Especially when that is happening every few months. I have one client who has basically decided to hold off developing any new products this year.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4470Valkrist wrote: Sat Jun 12, 2021 10:16 am Yeah, the world has gone topsy-turvy. I remember not that long ago the cost of metal was affecting things; then it became the rising costs of fuel which affected shipping; now (or at least for Canada) it's the cost of lumber that has gone into the realm of pure insanity. Increases have been in the 300%+ range. It's affected everything, from home construction, to putting up a simple fence board or two.
Lumber/timber prices finally coming down....just in time (actually a little early but that is OK) for my upcoming woodworking class.
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4471Can you carve me a Bilbo in Bag End for $130 instead of me paying Weta $1300 then?
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4472Sure.. no problem (as the youngsters say).Valkrist wrote: Sat Jun 19, 2021 4:51 am Can you carve me a Bilbo in Bag End for $130 instead of me paying Weta $1300 then?
But you might have to squint a little so as to overlook the maybe, sort of, not quite accurate representation.
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4473It can't be worse than some of the abominations Weta has tried to pass off recently. Frodo on the cart and Arwen on Asfaloth come to mind.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4474Hi Kit are there any plans to re-release Gimli's battle axe and walking axe?
Re: United Cutlery's - The Hobbit - Movie Props!
4475I have not heard anything about a new run of the battle axes. UC discussed making another run of walking axes last month, but it looks like the original casting molds, which were very worn, are now broken. It's too expensive to retool for the small run that they would need to make, so I think that one is now officially closed.TMcLim wrote: Sun Jul 18, 2021 12:31 pm Hi Kit are there any plans to re-release Gimli's battle axe and walking axe?
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4476When it was first announced that they were going to reissue Isildur's sword it was up on Budk's website, but now is gone. Is there a issue with the molds for that as well? MC Sam's sword is also back on their site too.Nasnandos wrote: Sun Jul 18, 2021 3:49 pmI have not heard anything about a new run of the battle axes. UC discussed making another run of walking axes last month, but it looks like the original casting molds, which were very worn, are now broken. It's too expensive to retool for the small run that they would need to make, so I think that one is now officially closed.TMcLim wrote: Sun Jul 18, 2021 12:31 pm Hi Kit are there any plans to re-release Gimli's battle axe and walking axe?
Re: United Cutlery's - The Hobbit - Movie Props!
4477Not that I have heard. They may have taken it down when I suggested they make some improvements to the grip and some other details. The grip on the original production looked terrible.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4478MC Samwise is coming back? Wasn't that originally a Limited item? Mine says of 600, but they never etched the number on the blade so to this day I have an unnumbered sword. If they are re-releasing it, I hope it's another case of an LE run that was never originally completed rather than another promise broken to customers like the Sauron helm.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4479All I see is the standard Sword of Sam on their site. That MC version sold out the year it was released, long ago.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4480Just going by what N2 posted, I didn't actually check the site. If it's the standard version, then all good.Nasnandos wrote: Mon Jul 19, 2021 11:26 am All I see is the standard Sword of Sam on their site. That MC version sold out the year it was released, long ago.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4481I should have clarified. it is BudK's wholesale site and not the retail site that has these listed. They also have both Glamdring and Sting scabbards, Narsil, Witchking sword, Isildur's helm and both Gondorian shields (wood and polyresin) but only a few have actual dates on estimated arrivals and not yet able to order.Nasnandos wrote: Mon Jul 19, 2021 11:26 am All I see is the standard Sword of Sam on their site. That MC version sold out the year it was released, long ago.
This is usually a good indicator of what items are coming or reissued. I was just curious as some items are showing up, while others are disappearing. With increased material costs and supply issues still ongoing I was wondering how many items this may effect.
Re: United Cutlery's - The Hobbit - Movie Props!
4482Ah, I see. There cant be more wood Gondor shields coming as those sold out, but I know another run of the poly version is being made. I think I mentioned all those other items you listed here already. I'm curious to see how many of those will actually be made. Prices have been going crazy since January. I know it is driving the factories crazy. They lock in a price and a month or two later they have to go up, and I'm not talking a few cents. Major increases. Several projects I am working on have been cancelled because the increases made the projects too risky.
KRDS
Re: United Cutlery's - The Hobbit - Movie Props!
4483On the bright side Andy at MansionProps will, well, is, working on both throwing axes. Hopes to do them in steel as well. So those who have wanted the full set of axes will now have that option.
Re: United Cutlery's - The Hobbit - Movie Props!
4484That is unfortunate, I guess the hunt for that one will continue! They seem to have gotten quite rare. That is great that the Gondorian shield is finishing its run, although I would have prefered the wood version.Nasnandos wrote: Sun Jul 18, 2021 3:49 pmI have not heard anything about a new run of the battle axes. UC discussed making another run of walking axes last month, but it looks like the original casting molds, which were very worn, are now broken. It's too expensive to retool for the small run that they would need to make, so I think that one is now officially closed.TMcLim wrote: Sun Jul 18, 2021 12:31 pm Hi Kit are there any plans to re-release Gimli's battle axe and walking axe?
Re: United Cutlery's - The Hobbit - Movie Props!
4485JJ...do you have a link to Mansion Props and specifically to the Throwing Axes?JJByers wrote: Tue Jul 20, 2021 2:14 am On the bright side Andy at MansionProps will, well, is, working on both throwing axes. Hopes to do them in steel as well. So those who have wanted the full set of axes will now have that option.
I went to the FB page and scrolled through all the photos.
I see that he has a Rohan axe (or two) which looks very good. (Is that for sale or only in production or a bespoke job?)
But I didn't see any Dwarven axes
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4486That's disappointing about the Walking axe. I was optimistic it would be the latest in this string of reissues. I'll still hold out hope though that demand will once again be high enough to make it worthwhile for UC to invest in the tooling. Maybe by that time manufacturing costs will have lowered as well.
Re: United Cutlery's - The Hobbit - Movie Props!
4487You'll need to follow his FB and IG. He posts 3d models and renderings to the story but they go after 24 hrs. I had mentioned to him I was done collecting unless someone came out with some good dwarven stuff and he let me know he was working in them.Deimos wrote: Tue Jul 20, 2021 8:17 amJJ...do you have a link to Mansion Props and specifically to the Throwing Axes?JJByers wrote: Tue Jul 20, 2021 2:14 am On the bright side Andy at MansionProps will, well, is, working on both throwing axes. Hopes to do them in steel as well. So those who have wanted the full set of axes will now have that option.
I went to the FB page and scrolled through all the photos.
I see that he has a Rohan axe (or two) which looks very good. (Is that for sale or only in production or a bespoke job?)
But I didn't see any Dwarven axes
Re: United Cutlery's - The Hobbit - Movie Props!
4488OK. THanks. What do you think of his Rohan Axe(s)?JJByers wrote: Wed Jul 21, 2021 2:56 am ....
You'll need to follow his FB and IG. He posts 3d models and renderings to the story but they go after 24 hrs. I had mentioned to him I was done collecting unless someone came out with some good dwarven stuff and he let me know he was working in them.
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4489I dont have them. Losnekos on IG has one. The attention to detail is spot on. Looks good to me.Deimos wrote: Wed Jul 21, 2021 5:34 amOK. THanks. What do you think of his Rohan Axe(s)?JJByers wrote: Wed Jul 21, 2021 2:56 am ....
You'll need to follow his FB and IG. He posts 3d models and renderings to the story but they go after 24 hrs. I had mentioned to him I was done collecting unless someone came out with some good dwarven stuff and he let me know he was working in them.
Re: United Cutlery's - The Hobbit - Movie Props!
4490Hey Kit, I'd need to do a minor touch up to my MC Glamdring pommel, is there any way you can tell me what I'd need to uwe to match the antiquing the factory used?
Thanks !
Thanks !
Re: United Cutlery's - The Hobbit - Movie Props!
4491Drew from UC posted this on FB (for those that don't have it):
"I thought it would be interesting to see what you guys are most excited about in the upcoming [New] United Cutlery LOTR projects.
1 - MC Anduril
2 - Boromir's Dagger
3 - Theoden Helm
4 - Guthwine Scabbard
5 - Rohan Axe
6 - Rohan Spear Head
7 - Theodred Sword
8 - Sauron Helm 1/2 Scale"
I think we've talked about all of these here already. The only one that I didn't recall was the Rohan Axe. I think most of you know which one got my vote
"I thought it would be interesting to see what you guys are most excited about in the upcoming [New] United Cutlery LOTR projects.
1 - MC Anduril
2 - Boromir's Dagger
3 - Theoden Helm
4 - Guthwine Scabbard
5 - Rohan Axe
6 - Rohan Spear Head
7 - Theodred Sword
8 - Sauron Helm 1/2 Scale"
I think we've talked about all of these here already. The only one that I didn't recall was the Rohan Axe. I think most of you know which one got my vote
"Igitur qui desiderat pacem, praeparet bellum!"
Re: United Cutlery's - The Hobbit - Movie Props!
4492I thought the Rohan spear was scrapped due to cost. There was discussions about the blue bladed Sting, which isn't on the list and the 1/2 scale Sauron helmet is news to me.
Re: United Cutlery's - The Hobbit - Movie Props!
4493Two samples of the Rohan spear were sent in. A steel version and a resin version. They’re apparently now going to do a cost analysis to see which is the cheaper option.
Re: United Cutlery's - The Hobbit - Movie Props!
4494Oh, my bad. I might have confused the 1/2 scale Sauron Helm with talk over on FB.
To add to SH's post - I believe Drew also stated that even the metal spearhead will not be "functional" (for those about to ask) due to not being tempered steel.
To add to SH's post - I believe Drew also stated that even the metal spearhead will not be "functional" (for those about to ask) due to not being tempered steel.
"Igitur qui desiderat pacem, praeparet bellum!"
Re: United Cutlery's - The Hobbit - Movie Props!
4495A 1/2 scale Sauron helm? Who asked for that? There's a few 1:1 helms I'd rather see them take a crack at first before going back to what would now be the third release of the same helm, and at a scale that matches nothing else UC has put out in the past. That's a head-scratcher to me.
Kit, care to shed some light on us in-the-dark peasants? And like N2, I'd like to know if your idea for the blue Sting was met with deafening silence, rousing cheers, or an indifferent shrug.
Kit, care to shed some light on us in-the-dark peasants? And like N2, I'd like to know if your idea for the blue Sting was met with deafening silence, rousing cheers, or an indifferent shrug.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4496So I guess this was also posted by Drew on Facebook. I didn't know they were going to even try for a metal casting due to warping. As glad as I am that is metal versus polyresin, I'm really curious as to how this was manufactured differently to keep it straight and within costs to produce.
Re: United Cutlery's - The Hobbit - Movie Props!
4497Well, well, well... this is certainly good news. Pity the shaft will likely separate halfway down rather than at the socket, but I heard that you're not allowed to have a cake if you plan to eat it too.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4498Is that a "woven" rubber sleeve/collar I see? (a la the grip on Isildur's Sword)
"Eternity is an awful long time, especially towards the end."
"What you see and what you hear depends a great deal on where you are standing.
It also depends on what sort of person you are.” -- CSL
Re: United Cutlery's - The Hobbit - Movie Props!
4499Good catch... and may the gods help us all if it is.Deimos wrote: Fri Aug 13, 2021 12:08 pm Is that a "woven" rubber sleeve/collar I see? (a la the grip on Isildur's Sword)
Mind you, it does look just a tad better than Isildur's hilt.
This Space for Rent
Re: United Cutlery's - The Hobbit - Movie Props!
4500Correct me if I'm wrong, but I believe "cold cast steel" is actually metal powder mixed with resin.
"If more of us valued food and cheer and song above hoarded gold, it would be a merrier world."
~~ Thorin Oakenshield